MDT Buttstock Weight, SRS-X Elite/Lite

MDT BUTTSTOCK WEIGHT

Add weight to your buttstock to decrease recoil and balance your rifle.

SRS-Premier Buttstock Weight

This SRS V5 weight mounts in the lower pocket of the MDT ESS, ACC, and SRS V5 buttstocks. The weight and its hardware will add 0.65 lb to your rifle system. Attaching near the bottom of the stock will move your balance point rearward significantly.

SRS-X Elite Buttstock Weight

The weight for the SRS-X Elite (found on the MDT ACC Elite) will add about 0.75 lb to the rear of your rifle in order to properly balance your chassis system. As the weight is fairly far from the standard centre of gravity of the chassis, it has a profound affect on balance and is recommended for competitors wanting to offset the weight of an MTU/Straight barrel or heavier muzzle device.

To install, remove the buttpad assembly, slide the weight into the lower pocket, attach with included screws and reinstall the buttpad assembly. The buttstock weight is a nice compliment to our M-LOK Exterior Forend Weights.

This weight mounts in the lower pocket of the MDT SRS buttstocks. The weight and it’s hardware will add 0.65 lb to .75 lb to your rifle system all the way at the rear, moving your balance point rearward significantly. To install, simply remove the buttpad assembly, slide the weight into the lower pocket, attach with included screws and reinstall the buttpad assembly.

SPECIFICATIONS

• Underside clearance slot to allow mounting of M-Lok accessories to buttstock even with weight installed
• Width designed to closely match the width of the ESS, ACC and SRS buttstock

COMPATIBILITY

This product has been designed to fit only the MDT SRS V5 and Elite buttstocks and will not fit in any other manufacturer’s stocks. The weight will also slot into the lower pocket of the second-generation ESS folding stock.

HARDWARE INCLUDED

• Three #8-32 x ½” Socket head cap screws used to fix the weight into the pocket of the buttstock

DIMENSIONS

• Weight: 0.65 lbs / weight (including screws)
• Material: Case-hardened Steel

IMPORTANT NOTES

Install with blue (temporary) Loctite as necessary.